Table of Contents
Advertisement
OPTION 2:
Use the small L-brackets and screws
1. Place the small L-bracket to the unit as shown and mark the drill-holes on the
mantel as shown in Fig. F.
Fig. F
2. Drill the holes with diameter 1/16 inches (2 mm) and depth 5/16 inches (8 mm)
on the mantel. Each small L-bracket needs 4 holes. See Fig. G.
Fig. G
Fig. H
3. Attach the small L-bracket and lock in place with screws as shown in Fig. H.
CLEANING
To clean unit first turn off controls on unit and unplug the unit from power source.
To clean glass display panel; remove dust with clean dry cloth or to remove finger
prints and other marks clean glass with clean damp cloth. Do not use abrasive
cleaners or spray liquids on glass display panel surface. Metal and metal painted
parts should be cleaned with damp cloth. Do not use abrasive cleaners or spray
liquids on these surfaces.
WARRANTY
Every electric fireplace heater is tested before it leaves the factory and it is
guaranteed for one year. If the unit should fail to operate correctly within one year
from the date of purchase, call customer service at 1-800-459-4409 (EST). We will,
at our discretion either repair or replace the unit. It will have to be returned to
us freight prepaid and we will return the repaired or replaced unit to you freight
prepaid. The company's sole obligation is to repair or replace the unit.
This warranty is void if in the opinion of Quality Craft the unit has been tampered
with, altered, misused, damaged, abused or used with the wrong power source.
Light bulbs and remote batteries are not covered by this warranty. The warranty is
for homeowner use only and does not cover units used in commercial situations.
Imported by
Quality Craft
Laval, Quebec, Canada H7S 2G7
1-800-459-4409 (EST)
www.qualitycraft.com
Made in China
8
Advertisement
Table of Contents
