Lighting submenu
Access the
Lighting
submenu via the
Settings...
menu. Use the
menu to change the lamp and lighting
settings on your vehicle.
The following functions are available:
Function
Setting daytime running lamp
mode (USA only)
Setting locator lighting
Setting night security
illumination
Setting interior lighting delayed
shut-off
Setting daytime running lamp mode
(USA only)
Lighting
sub-
i
This function is not available in countries
where the daytime running lamp mode is manda-
tory and therefore in a constant mode.
Move the selection marker with
button æ or ç to the
Page
submenu.
143
Press button j or k repeatedly
until the message
appears in the multifunction display.
144
The selection marker is on the current
144
setting.
145
Press button æ or ç to select
manual operation (
running lamp mode (
With daytime running lamp mode activated
and the exterior lamp switch at
position M or U, the low beam
headlamps are switched on when the en-
gine is running.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
Lighting
Parking lamps
Tail lamps
Headlamp mode
License plate lamps
Side marker lamps
For more information on the daytime run-
ning lamp mode, see "Lighting"
( page 109).
i
For safety reasons, resetting all the func-
tions of all submenus to the factory settings
while driving ( page 136) will not deactivate the
daytime running lamp mode.
The following message appears in the multifunc-
tion display:
Manual
) or daytime
Lighting Cannot be completely reset to
Constant
).
factory settings while driving.
Controls in detail
Control system
143