Table of Contents
Advertisement
H/W Monitor
CPU/System FAN Fail Detect
Enable CPU/System Fan Stop Warning function.
Option available: Enabled/Disabled. Default setting is Enabled.
CPU/System SMART FAN Control
Enable CPU/System Smart Fan function.
Option available: Enabled/Disabled. Default setting is Enabled.
SYS FAN Type
Select system fan type.
Option available: 3 Pin/4 Pin. Default setting is 3 Pin.
Intel® Smart Connect Technology
ISCT Configuration
Enables or disables Intel Smart Connect Technology. (Default: Disabled)
Network Stack
Network stack
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the
Windows Deployment Services server. (Default: Disable Link)
Ipv4 PXE Support
Enables or disables IPv4 PXE Support. This is configurable only when Network Stack is enabled.
Ipv6 PXE Support
Enables or disables IPv6 PXE Support. This is configurable only when Network Stack is enabled.
CPU PPM Configuration
EIST (Enhanced Intel® SpeedStep Technology)
Conventional Intel® SpeedStep Technology switches both voltage and frequency in tandem between high and
low levels in response to processor load.
Options available: Enabled/Disabled. Default setting is Enabled.
Turbo Mode
When this feature is enabled, the processor can dynamically overclock one or two of its four processing cores
to improve performance with applications that are not multi-threaded or optimized for quad-core processors.
Options available: Enabled/Disabled. Default setting is Enabled.
CPU C3/C6 Report (Note)
Allows you to determine whether to let the CPU enter C3/C6 mode in system halt state. When enabled, the CPU
core frequency and voltage will be reduced during system halt state to decrease power consumption. The C3/C6
state is a more enhanced power-saving state than C1.
Options available: Enabled/Disabled. Default setting is Enabled.
Default setting for C3/C6: Enabled.
32
Advertisement
Table of Contents
