Table of Contents
Advertisement
Removing head restraints
Seat position for removal of head restraints
from second-row seats
1 Head restraint
2 Release button
To remove head restraint 1, pull head
restraint 1 to its uppermost position.
Press release button 2 and pull out
head restraint 1.
i
The third-row seat head restraints are re-
moved in the same manner.
Installing head restraints
Insert head restraint 1 into openings
on the seat backrest.
i
On the second-row seats, the guide bar with
the detent must be on the left.
Push head restraint 1 down until it
audibly engages.
Push release button 2 and adjust
head restraint 1 to the desired
position ( page 139).
i
The third-row seat head restraints are
installed in the same manner.
Controls in detail
Armrests
The second-row seat armrests can be
folded up, when loading for example, and
adjusted.
Folding up
Move the armrest into a vertical posi-
tion until it engages.
Adjusting
With the armrest folded up, disengage
the armrest by pushing it towards the
rear slightly.
Fold the armrest down to the lowest
and then to the desired position until it
engages.
To readjust the armrest to a higher
position, move armrest up to the
desired position until it engages.
i
To readjust the armrest to a lower position,
you must first fold up the armrest again and re-
peat the steps above.
Seats
141
Advertisement
Table of Contents
