Creating A Waypoint - BHCnav NAVA 200 Quick Manual

1.When the NAVA on, Press and quickly release
2.Rock right on the ROCKER key to increase the
To mark your current location, you must have a valid position (2D or 3D) fix:1.
and release the MARK key. 2. To accept the waypoint with the default information,
highlight Save and press the ENTER key.
select the appropriate field and press the ENTER key to open
keypad. After entering and confirming
To install 2xAA batteries:
1.Remove the battery cover from the back of the
unit. Turn the D-ring counter-clockwise and pull
the cover away.
2.Insert two AA batteries, observing the proper
polarity.
To install Li-ion batteries:
1.Remove the battery cover from the back of the
unit. Turn the D-ring counter-clockwise and pull
the cover away.2.Insert the Li-ion batteries.
To turn on/off the NAVA:
1.Press and hold POWER button for more than 2
seconds to turn on the unit.
2.When unit is on, press and hold the POWER
button for more than 2 seconds to turn off the
unit.
To adjust the backlight level:
page.
3.Press NEXT/EXIT key to exit the Backlight
page.

Creating a Waypoint

your changes, select OK, and press ENTER key.
POWER button to open the Backlight
brightness; rock left to decrease.
OR To change waypoint name and note,
Press
the on-screen