Removing And Reinstalling The Battery - Riccar SupraLite R10CV Owner's Manual

MAIntenAnCe AnD CARe

Removing and Reinstalling the Battery

NOTE: Turn the vacuum Off and unplug the
charger from the Charge Point before removing
the battery.
• Remove the vacuum bag (see Replacing the
Vacuum Bag, page 9).
• Remove the bag mount screws, then remove
the bag mount (Fig. 1).
• Remove the bag compartment.
• Remove the battery clamp screws and lift the
battery off its connectors (Fig. 2).
• To replace the battery reverse the above steps.
TACONY CORPORATION
MATERIAL FINISH
1760 Gilsinn Lane, Fenton, MO 63026
DRAWN DATE
UNLESS OTHERWISE SPECIFIED
ISSUED DATE
X.X .5 mm RADII X.X
X.XX .25mm
X.XXX .12mm MACHINE SURFACE
SCALE
X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX
DO NOT SCALE
0.250
0 30" COMMON
10
SHEET
7 OF 8
REV
Fig. 1
MATERIAL
DRAWN
ISSUED
SCALE
0.250
Fig. 2
DESCRIPTION
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
.5mm
INFORMATION ONLY. IT MAY NOT BE REPRO-
X.XX .25mm
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
TO BE CONCETRIC TO .05mm
CORPORATION.
PART NUMBER REV
DESCRIPTION OF CHANGE
DATE ECN NO BY
TACONY C
FINISH
1760 Gilsinn Lane, Fen
DATE
UNLESS OTHE
DATE
X.X .5 mm RADII X.X
X.XX .25mm X.XX
X.XXX .12mm MACHINE S
X.XXXX .012mm BREAK SH
DO NOT SCALE
0 30" COMMON
DRAWING SIZE:C
PART NUMBER
SHEET 7 OF 8