Photometric Chart; Safety Warning - Sagitter SG SAGOLEDW User Manual

Led profile white
Table of Contents

Advertisement

Available languages

Available languages

4. Photometric chart

5. Safety warning

1. Warning:
Every person involved with installation, operation and maintenance of this device has to be qualified.
User must follow the instructions in this manual.
Unqualified person cannot open the housing cover and operate the device, orr the dealer will not accept
liability for any resulting defects or problems.
The device against rain and moisture.
2.
Warning notes:
Power supply: AC 100-250V, 50/60 Hz.
Make sure the power switch is off, the power plug, outlet and the earth connection is in well condition
before connecting the device with the mains.
Please use appropriate power plug nd outlet. Never connect the power cord of this device with other
electrical equipment.
During move and installation, make sure the device not crashed with metal parts and other tough
materials.
Always disconnect from the mains, when the device is on the installation and dismantled.
The minimum distance between light output and the illuminated surface must be more than 50 cm.
The device must only be installed on a non flammable surface. In order to safeguard sufficient
ventilation, leave 50cm of free space around the device. Please note that heat sensitive objects may be
deformed or damaged by the emitted heat.
11

Advertisement

Table of Contents
loading

Table of Contents