Samsung HW-J450 User Manual page 14

o Before moving or installing the product, be sure to turn off the power and disconnect the power
cord,
tf the main unit is powered off, the wireless subwoofer wit1be in standby mode and the STANDBY
LED on the upper side wit1come on after the Link indicator (Blue LED) blinks for 30 seconds,
tf you use a device that uses the same frequency (2,4GHz) as the Soundbar near the Soundbar,
intererence may cause some sound interruption,
The transmission distance of the wireless signat between the main unit and subwoofer is about 33
ft,, but may va,5,depending on your operating environment tf a steel-concrete or metallic watt is
between the main unit and the wireless subwoofer, the system may not operate at att, because the
wireless signat cannot penetrate metat,
tf the main unit doesn't make a wireless connection, fottow steps t -5 to re-set the connection
between the main unit and wireless subwoofer,
o The wireless receiving antenna is buitt into the wireless subwoofer, Keepthe unit away from water
and moisture,
For optima1 listening performance, make sure that the area around the wireless subwoofer tocation
is dear of any obstructions,
14