Remote Control - Mercedes-Benz 2005 M-Class Operator's Manual

Remote control

Replacement batteries: Lithium, type
CR 2025 or equivalent.
1 Release button
2 Battery cover
Unfold the key by pressing release
button 1.
Pull off battery cover 2 in direction of
arrow.
Remove the batteries.
i
When inserting the batteries, make
sure they are clean and free of lint.
Using a lint-free cloth, insert new bat-
teries under the contact spring with the
plus (+) side facing up.
Press battery cover 2 onto housing
until locked in place.
Push each button to assure proper op-
eration of the remote control.
If remote control does not function cor-
rectly after replacing the batteries, the
system may have to be resynchronized.
Practical hints
Replacing key batteries
Synchronizing remote control
Turn key in steering lock to position 2
( page 33), then to position 0 and re-
move.
Within ten seconds, push and hold
button ‹ while pushing
button Πfive times.
Release the button, and press ‹,
Œ or Š once.
The remote control is resynchronized.
Recheck all of the remote control func-
tions.
i
If it is not possible to resynchronize the
remote control, have the system
checked at an authorized
Mercedes-Benz Light Truck Center.
273