Front Panel; Ds-8600Ni-E8 - HIKVISION DS-7104NI-SL Quick Operation Manual

Quick Operation Guide of Network Video Recorder

Front Panel

DS-8600NI-E8

No. Name
Status
1
Indicators
2 IR Receiver
3 DVD-R/W
4 Alphanumeric Buttons
5 USB Interfaces
Composite
6
Keys
Function Description
ALARM Turns red when a sensor alarm is detected.
Ready LED is normally blue, indicating that the device is
READY
functioning properly.
Turns blue when device is controlled by an IR remote.
STATUS
Turns red when controlled by a keyboard and purple when IR
remote and keyboard is used at the same time.
HDD Flashes red when data is being read from or written to HDD.
MODEM Reserved for future usage.
Tx/Rx Flashes blue when network connection is functioning properly.
Guard LED turns blue when the device is in armed status; at this
time, an alarm is enabled when an event is detected.
GUARD The LED turns off when the device is unarmed. The arm/disarm
status can be changed by pressing and holding on the ESC
button for more than 3 seconds in live view mode.
Receiver for IR remote
Slot for DVD-R/W.
Switch to the corresponding channel in Live view or PTZ
Control mode.
Input numbers and characters in Edit mode.
Switch between different channels in Playback mode.
The light of the button is blue when the corresponding channel is
recording; it is red when the channel is in network transmission
status; it is pink when the channel is recording and transmitting.
Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
Back to the previous menu.
ESC
Press for Arming/disarming the device in Live View mode.
Enter the Manual Record setting menu.
In PTZ control settings, press the button and then you can call a
REC/SHOT
PTZ preset by pressing Numeric button.
It is also used to turn audio on/off in the Playback mode.
The button is used to enter the Playback mode.
PLAY/AUTO
It is also used to auto scan in the PTZ Control menu.
ZOOM+ Zoom in the PTZ camera in the PTZ Control setting.
10