EFI Fiery proServer User Manual page 18

Hide thumbs Also See for Fiery proServer:
Table of Contents

Advertisement

Verify that the problem is not caused by a particular print job or application.
Try printing a different job or using a different printing application.
The network is functioning, and the Fiery proServer is properly connected to
the network.
Verify the following:
The Fiery proServer appears in the list of computers on the network.
If the Fiery proServer does not appear in the list of computers on the network, another device
on the network may have been assigned the same Ethernet hardware address.
The Fiery proServer DHCP setting matches the DHCP setting of the customer's network.
If DHCP error messages appear on the monitor, the Fiery proServer may be searching for a
nonexistent DHCP server. DHCP is enabled by default on the Fiery proServer, but the
customer's network may not be using DHCP. In this case, you need to configure a static IP
address for the Fiery proServer.
If the problem persists, proceed to
Display of hidden files in the Program Data directory is enabled.
You must be able to access some files in the Program Data directory for certain
troubleshooting purposes.
T
O DISPLAY HIDDEN FILES
1. In Windows Explorer, select Organize > Folder and search options, and click the View tab.
2. Under Advanced Settings, select Files and Folders > Hidden files and folders, and click "Show
hidden files, folders, and drives."
3. (Optional) Deselect "Hide extensions for known file types."
4. Click OK to confirm the changes.
JobFolder directory is shared.
The JobFolder directory must be shared to allow access to hotfolders.
T
O ENABLE SHARING WITH THE JOB FOLDER DIRECTORY
1. In the D:\ drive, right-click the "Jobs" folder and open the "JobFolder" properties window.
2. Click the Sharing tab > Share button.
3. Select "Everyone" from the drop-down menu and click Add.
4. Set the permission level to "Read/Write" and then click Share.
5. Click Done to confirm the changes, and close the "JobFolder" properties window.
"Checking interface connections" on page
18
19.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Fiery proServer and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents