Table of Contents
Advertisement
13
14
15
4.7.10 Factory reset
NovaPro HD is reset to factory setting.
4.7.11 Hardware version
View hardware version of NovaPro HD.
4.8 Communication Setting
Set Communication Mode and Network parameters of NovaPro HD.
There are two methods for communication , one is USB, the other is LAN. The system
will automatically identify the current communication mode, if both are inserted,
there are two options: USB preferred and LAN preferred. That means the system will
use USB/LAN mode for communication if you choose USB/LAN preferred when the
system detected both are active.
Network mode includes manual and automatic modes. You shall pay attention to that
IP address cannot conflict with other devices upon manual setting. It is obtained
through DHCP upon automatic setting.
Phone: NovaStar (Xi'an) 86-29-84507048
Website:
www.novastar-led.com
Undefined
Undefined
Undefined
NovaStar (Shenzhen) 86-755-33592492
NovaStar Tech Co.,Ltd
35
Advertisement
Table of Contents
