Step 3 Input Setting (Input Resolution Setting) - NovaStar NovaPro HD User Manual

for the nth network interface.
In the case of special-shaped cabinets, different cabinet sizes and
ii.
special-shaped screen, the NovaLCT-Mars software is required to be connected
to configure the screen.
During connection setting, you can rotate the button to see the effects of
iii.
different connections on the screen in real time. If you are satisfied with the
connection, you must press the button to save the setting. You can press the
return key to exit from the current operation.
During connection setting, you must ensure that the connection of each
iv.
network interface is downward in the same direction.
During connection setting, you must ensure that network interface 1 is the
v.
start position of the whole connection.

4.3 Step 3 Input setting (input resolution setting)

Set resolution of input source signal. Resolution can be directly set and changed for
digital input interfaces DVI, HDMI and DP on Pro. Resolution can only be modified for
other input methods on input devices.
Input resolution can be set in two ways:
Phone: NovaStar (Xi'an) 86-29-84507048
Website: www.novastar-led.com
NovaStar (Shenzhen) 86-755-33592492
NovaStar Tech Co.,Ltd
15