Cobra NAV ONE 2000 Operating Instructions Manual page 88

Add waypoints . . . . . . . .
to the trail
Name the
waypoint
Accept the
default name
Enter a
user-defined
name
At any place on the trail, while at the
1. Press the HERE function button to proceed to the
2. Press the SAVE function button to proceed to the
At the Save or Edit Name menu
The default name can be accepted.
A user-defined name can be entered.
At the Save or Edit Name menu
1. Press ENTER or the SAVE function button to accept the
default name and return to the
At the Save or Edit Name menu
1. Press the CLEAR function button to clear the default name.
2. Enter the name of choice using spell mode and press ENTER or the
SAVE function button.
The name will be saved and the system will return to the
Trail Mode screen :
GPS Data screen
Save or Edit Name menu
:
:
Trail Mode screen .
:
Trail Mode screen
.
NOTE
. An attempt to enter more
than 50 waypoints will result
in the
Full screen
the
menu
function button is pressed.
Trail Memory is Full
Trail memory is full and
the current trail has
stopped. You must
delete a trail to start
another one.
.
Press ENTER to accept.
86
Trail Memory is
rather than
Save or Edit Name
when the SAVE