Table of Contents
Advertisement
Infrared . . . . . . . . . . . . . .
Entry using infrared
Transfer
unsuccessful
The infrared port on the NAV ONE (NAV ONE 3000 only) can receive
data from PDA's if they are equipped with a compatible port. To use
this feature, the data item(s) to be transferred to the NAV ONE system
must be selected and prepared for transmission according to the
operating instructions for the sending device.
Once the sending device is ready and its infrared port is aimed at the
infrared port on the GPS unit, at the
1. Activate the sending device.
The system will proceed to the
Transfer unsuccessful
Transfer complete
If the data transfer is unsuccessful, a screen such as the
with an error code explaining what went wrong with the transfer. (An address validation screen
may appear briefly before the error message.) Pressing ENTER at the
will return the system to the
Infrared Transfer screen
The transfer can be repeated after the error has been corrected.
The BACK function button can be pressed to exit the infrared transfer mode and return to the
Add to Address Book menu
Infrared Transfer screen
:
Infrared Transfer screen
, then to one of two possible results:
Address Book screen
where two actions are available:
.
PDA positioned for
infrared transfer
will appear
Address Book screen
Infrared Transfer
Receiving...
BACK
Address Book
The input address is
invalid. Please check
it and retry.
Press ENTER to return.
BACK
49
Advertisement
Table of Contents
