Layout - Parkside PKS 1700 B2 Operation And Safety Notes

Anleitung_4300682_GR_DK:_
GB/
CY
of wood, always switch off the machine first.
- Pull out the power plug-
Refit all guards and safety devices
immediately after you have completed any
repairs or maintenance work.
Be sure to observe the safety information
and operating and maintenance instructions
issued by the manufacturer, as well as the
dimensions listed in the Technical Data.
It is imperative to observe the accident
prevention regulations in force in your area
as well as all other generally recognized
rules of safety.
Operation in enclosed areas is permitted
only with a suitable vacuum extraction
system.
The crosscut saw has to be connected to a
230 V socket-outlet with minimum fusing of
10 A.
Do not use any low-powered machines for
heavy duty work.
Be careful when working in vertical mode.
Caution: Take extra care when making
double miter cuts!
Please keep these safety instructions in a
safe place
14
27.10.2011 10:30 Uhr Seite 14

3. Layout

1. Handle
2. ON/OFF switch
3. Release lever
4. Saw shaft lock
5. Machine head
6. Movable blade guard
7. Saw blade
8. Clamping device
9. Workpiece support
10. Locking screw for workpiece support
11. Table insert
12. Latched position lever
13. Locking grip
14. Pointer
15. Scale
16. Turntable
17. Fixed saw table
18. Additional stability bar
19. Stop rail
20. Scale
21. Pointer
22. Sawdust bag
23. Locking screw
24. Locking screw for drag guide
25. Fastening bolt
26. Drag guide
27. Knurled screw for cutting depth limiter
28. Stop for cutting depth limiter
29. Adjustment screw (90°)
30. Adjustment screw (45°)
31. Flange bolt
32. Outer flange
33. Laser
34. ON/OFF switch for laser
35. Battery compartment
36. Battery compartment cover
37. Screw
38. Inner flange
c) Allen key, 8 mm
d) Counternut
y) 45° stop angle (not supplied)
z) 90° stop angle (not supplied)