Intended use Remove adjusting keys and wrenches Your Black & Decker hedgetrimmer has been designed for Always check that adjusting keys and wrenches are removed trimming hedges, shrubs and brambles. This tool is intended from the tool before operating the tool. for consumer use only.
Electrical safety If the supply cord is damaged, it must be replaced by the This tool is double insulated; therefore no earth wire manufacturer or an authorised Black & Decker Service is required. Always check that the power supply Centre in order to avoid a hazard. corresponds to the voltage on the rating plate.
Maintenance For your safety, this tool is equipped with a double switching system. This system prevents starting the tool Your tool has been designed to operate over a long period of inadvertently and will only allow operation while holding time with a minimum of maintenance. Continuous satisfactory the tool with both hands.
The product has been subjected to misuse or neglect; The product has sustained damage through foreign Technical data objects, substances or accidents; GT90 GT100 GT105 GT110 Repairs have been attempted by persons other than Voltage authorised repair agents or Black & Decker service staff.
Page 8
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand United Kingdom Black &...