Moving The Logo Badge; Frequently Asked Questions; Troubleshooting - MartinLogan MOTION SLM XL User Manual

Required hardware (included):
• (3) #8 - 3/4-inch Phillips screws
• (2) 50mm Allen screws
• (1) Vertical stand pillar
• (1) Stand base
1 Using the Allen tool and two 50mm Allen
screws, attach the vertical stand pillar to the
stand base (fig. 5).
F a
requently
How do I clean my speakers?
Use a dust free cloth (such as a micro fiber cloth)
or a soft brush to remove dust from your speakers.
Do not spray any kind of cleaning agent on or in
close proximity to the drivers .
Could you suggest a list of suitable elec-
tronics and cables ideal for MartinLogan
speakers?
We have no favorites and use electronics and
cables quite interchangeably. We would suggest
listening to a number of brands—and above all
else—trust your ears. Dealers are always the best
source for information when purchasing additional
audio equipment.
t
roubleshooting
No Output
• Check that all system components are turned
on and source material is playing.
• Check speaker wires and connections.
• Check all interconnecting cables.
• If you are unable to resolve your problem,
please contact your dealer or MartinLogan cus-
tomer service.
6
q
sked uestions
2 Using a Phillips screwdriver and three #8 x
3/4-inch screws, attach the vertical stand to
the back of the speaker (fig. 5).

MOVING THE LOGO BADGE

The logo badge is attached magnetically. Using
your fingers, pull it away from the grille cover and
reattach it at the desired position.
Is there likely to be any interaction
between my speakers and the televi-
sion in my A/V system?
Yes. These speakers are not shielded and should
be kept at least 2 feet away from a CRT television.
Will exposure to sunlight affect the life
or performance of my speakers?
We recommend against placing any loudspeaker
in direct sunlight. Ultraviolet (UV) rays from the sun
can cause deterioration of cabinet, speaker cones,
etc. Small exposures to UV will not cause a prob-
lem. Filtering of UV rays through glass will greatly
reduce the negative effects.