Connecting The Flash Module (Dsc Flash) To The Camera (Dsc) - Minox DSC Instruction Manual

Connecting the flash module
(DSC Flash) to the camera (DSC)
Switch both the camera and the flash module off
before connecting the external flash to the DSC.
Hold the flash module with the monitor facing
upward next to the DSC with the camera controls
facing upward. Now join the two units so that
the connector of the flash fits into the socket of
the camera and the safety chain eye of the DSC
fits into the mating opening on the flash module.
To connect the two devices simultaneously press
down and gently squeeze the engaging notches.
When doing so, the notches of the flash must
engage in the corresponding openings on the
DSC. The flash module is now firmly connected
and engaged with the DSC camera.
To separate the flash module and camera again
you must first switch off both units. Now carefully
press with a finger on one of the two engaging
notches (top or bottom) between the two devices.
Engaging notches
35