Using Minox Classic Camera Flash With Your Camera - Minox DCC Leica M3 Instruction Manual

Hide thumbs Also See for DCC Leica M3:
Table of Contents

Advertisement

Available languages

Available languages

Using Minox Classic Camera Flash
with your camera
There is no flash integrated in your camera. If
you wish to shoot images in unfavourable light
conditions (e.g. twilight or in dark areas), you will
require the MINOX Classic Camera Flash which
is optionally available from your Minox dealer or
under www.minox.com . The Order number is
69125.
Connect the flash as described in the instructions
enclosed with the flash unit. Pay attention to the
correct seat of the contacts.
Turn on your camera and press the mode button
until you get to the setup menu. Scroll to Ca-
mera and press the shutter button. It will take
you to the Camera setting menu. Scroll to Flash
and press the shutter button again. The flash
menu will show up and you can use up or down
buttons to select Auto or Off . Select Auto and
3
press the shutter button again to confirm your
selection.
Press the mode button to go back to Take Photo
mode,
will show on the display screen. Then you
can take a picture as usual.
Note: Once the camera is in the auto flash mode,
the camera will remain in this mode until the camera
is switched off.
Camera
Flash
Quality
Movie
Self Timer
WB
Flash
Auto
Off

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents