Cleaning The Door Glazing; Removing The Internal Glass Panels - Smeg DOSPA38X User Manuals

2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections A are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
Cleaning and maintenance

4.6 Cleaning the door glazing

The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
4.7 Removing the internal glass
For easier cleaning the door internal glass
panels can be disassembled.
1. Remove the internal glass panel by
2. Then, pull the front part upwards (2). In
3. Some models have an intermediate glass
We recommend the use of
cleaning products distributed by
the manufacturer.
panels
pulling the rear part gently upwards,
following the movement indicated by the
arrows (1).
this way, the 4 pins attached to the glass
detach from their housings in the oven
door.
panel. Remove the intermediate glass
panel by lifting it upwards.
29