Trouble-Shooting; Searching For Your Code - One for All URC-3550 User Manual & Code Book

Trouble-Shooting

The Search Method
If your Television, Video Recorder or Satellite Receiver does
not respond to the SUPER EASY after you have tried all the
codes listed for your brand, try the Search Method. The Search
Method may also work if your brand is not listed at all.
Let's say you cannot get your SUPER EASY to control your
Television:
1
Switch your Television on.
2
Press the TV key on your SUPER EASY.
TV
3
Aim the SUPER EASY at your Television.
Press and hold down SETUP until the
SUPER EASY red light blinks twice. Then,
SETUP
press 9 9 1. The red light will blink
twice.
9 1 9
4
Now, alternate between TV and POWER,
over and over, until your Television turns
off. You may have to press these keys
TV
many times, so please be patient.
Remember to keep pointing the SUPER
EASY at your Television when you press
the POWER and TV keys.
POWER
5 When your Television turns off,
press SETUP. Don't forget, press SETUP
as soon as your Television turns off. Now
SETUP
your SUPER EASY is ready to run your
Television.
Note:
- To search for the code for your Video or Satellite follow
the instructions above only press VCR or SAT during steps
2 and 4.
- If your Video's original remote control does not have a
power key, press PLAY instead of POWER when searching
for your code.
15