Memorex MLTD2622 User Manual page 11

How to setup the TV

Use an antenna cable(not included) to connect the VHF/UHF signal to the LCD TV's ANT.
Terminal(refer to page17-21).

Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.

Insert the two batteries in remote control(battery not included).
Step1 Slide the back cover up to open the
battery compartment of the remote
control.
Step2 Insert two AAA size batteries.
Make sure to match the (+) and
( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment.
Slide the cover back into place.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner
etc.) on the remote, as it may suffer damage.

Connect other an external AV device (refer to page22-30).
Chapter 1 Introducing the LCD TV
9