Installing Driver - MSI MS-7520 ECLIPSE Series User Manual

Table of Contents

Advertisement

M S-7520 M ainboard

Installing Driver

Install Driver in Windows Vista / XP
† New Windows Vista / XP Installation
The following details the installation of the drivers while installing operating system.
1. W hen you start installing W indows XP, you may encounter a message stating,
"Setup could not determine the type of one or more mass storage devices
installed in your system". If this is the case, then you are already in the right
place and are ready to supply the driver. If this is not the case, then press F6
when prompted at the beginning of W indows setup.
2. Press the "S" key to select "Specify Additional Device".
3. You should be prompted to insert a floppy disk containing the Intel
driver into the A: drive.
Note: For W indows XP, you can use the USB floppy drive only.
For W indows Vista you can use CD/ DVD/ USB drive.
Important
Please follow the instruction below to make an "Intel
yourself.
1. Insert the MSI CD into the CD-ROM drive.
2. Click the "Browse CD" on the Setup screen.
3. Copy all the contents in \\IDE\Intel\ICH10R\Floppy to a formatted floppy
diskette.
4. The driver diskette for Intel
4. For W indows Vista:
During the Operating system installation, after selecting the location to install
Vista click on "Load Driver" button to install a third party SCSI or RAID driver.
5. When prompted, insert the floppy disk or media (CD/DVD or USB) you created
in step 3 and press Enter.
6. You should be shown a list of available SCSI Adapters.
7. Select the appropriate Intel RAID controller and press ENTER.
8. The next screen should confirm that you have selected the Intel
controller. Press ENTER again to continue.
9. You have successfully installed the Intel
W indows setup should continue.
10. Leave the disk in the floppy drive until the system reboots itself. W indows
setup will need to copy the files from the floppy again after the RAID volume
is formatted, and W indows setup starts copying files.\
C-10
®
ICH10R RAID Controller is done.
®
Matrix Storage Manager driver, and
®
RAID
®
RAID Driver" for
®
RAID

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents