Memorex MVD2019 Owner's Manual page 15

5E80301A E (12-17)
CHANNEL UP/DOWN
Press and release CH
channel automatically stops at the
next channel set into memory.
For proper operation, before select-
ing channels, they should be set into
the memory. See pages 17 and 18
"To memorize channels"
CALL
Press DISPLAY/CALL to display the
current informations on the screen.
Press DISPLAY/CALL again to clear
the call display.
• Channel number or VIDEO mode
• Stereo or SAP (second audio
program) audio status
• Audio output status
QUICK VIEW
This button allows you to go back to
the last channel selected by pressing
QUICK VIEW. Press QUICK VIEW
again to return to the last channel
you were watching.
MUTE
Press MUTE to switch off the sound.
The TV/DVD's sound will be silenced
and "MUTE" will briefly appear on the
screen. The sound can be switched
back on by pressing this button
again or one of the VOLUME + or –
buttons.
SLEEP
To set the TV/DVD to turn off after a
preset amount of time, press SLEEP
on the remote control. The clock will
count down 10 minutes for each press
of SLEEP (120, 110, ...10, 0). After the
sleep time is programmed, the display
will appear briefly every ten minutes
to remind you that the sleep timer is
operating. To confirm the sleep timer
setting, press SLEEP and the remain-
ing time will be displayed for a few sec-
onds. To cancel the sleep timer, press
SLEEP repeatedly until the display
turns to 0.
15
TV operation
or . The
STEREO SAP
SEL. MONO+SAP
22/01/2003, 22:04
CH 012
MUTE
SLEEP
120
15