Nstall The Hardware - Vonage VTA User Manual

Chapter 2 - nstallation
1
Connect the blue Ethernet cable into the
blue port labeled Internet on the back
of the telephone adapter. Connect the
other end to one of your router's Ethernet
ports.
3
Verify the status lights on the unit. The
Power, Phone 1, and nternet status lights
should be solid green. The Phone 2 light
will be a solid green if you have a second
Vonage line. (The nternet light will blink
whenever there is data activity.)
D-Link VTA User Manual
Install the Hardware
2
Connect the included power supply to the
Power port of the Telephone Adapter.
Warning: Using a power supply with a
different voltage will cause damage to
the device and will void the warranty.
6