Advertisement
Quick Links
TZW803+
Amplified output for SVGA 20mt cable
•
• Can be connected in cascade
• Autoswitching, autosequencing and mute
400 MHz bandwidth
•
• Remote control with dry contacts
• Tally
RS232 by computer
•
• Internal power unit
TZW803+ M 06/04/07
ELPRO Video Labs s.r.l.
St.da della Pronda, 45/B 10142 Torino ITALY
1
Tel.+39 0117701583 – Fax +39 011703751
8x1 VGA/XGA & AUDIO SWITCHER
Advertisement
Related Manuals for ELPRO TZW803+
Summary of Contents for ELPRO TZW803+
- Page 1 400 MHz bandwidth • • Remote control with dry contacts • Tally RS232 by computer • • Internal power unit TZW803+ M 06/04/07 ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
-
Page 2: Table Of Contents
The manufacturers shall not be answerable for damage resulting from the use, proper or otherwise, of their products. Product data and specifications are subject to change without prior notice. ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 3: Overview
TZW803+ 8x1 VGA/XGA & AUDIO SWITCHER 1.0 OVERVIEW Thank you for choosing this product. Check that the following items are included in the packaging: − The TZW803+ unit − The mains cable - sub-D 15v.m. vol. conn. with boot code ADP 010 - IR control - This handbook and the conformity certificate... - Page 4 TZW803+ 8x1 VGA/XGA & AUDIO SWITCHER TZW803+ CONNECTION – 6 SOURCES 1 DESTINATION ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
-
Page 5: Power Supply
TZW803+ 8x1 VGA/XGA & AUDIO SWITCHER 2.0 POWER SUPPLY The TZW803+ unit must be powered at 230 Vac 50Hz using the cable provided. The cable must be fitted in the related panel plug on the left at the back of the unit. The panel plug is equipped with a fuse-holder for 5X20 fuses. -
Page 6: Installation
For more than 20mt cables, it is advisable to insert an Elpro INBOX/4 type booster Use of Elpro cables is recommended in order to exploit the characteristics of the compensation circuit to the full. d) Connect the stereo audio in output from the 8 sources to the 8 RCA sockets ( AUDIO IN). -
Page 7: Local Control
TZW803+ 8x1 VGA/XGA & AUDIO SWITCHER 5.0 LOCAL CONTROL The TZW803+ switcher can be controlled using the 8 keys on the front panel of the unit. Switching on of the built-in led of the button indicates which source is switched to the output. At power-on, source 1 is switched automatically. - Page 8 The AUTOSEQUENCING AUTOSWITCHING, and MUTE commands are de-activated pressing a key on the built-in keyboard. In this case, the input of the key pressed will be switched on the output. ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
-
Page 9: Ancillary Functions
With the CASCADE option active, the three ancillary functions controlled by dry contacts are excluded. However, Autoswitching and Mute can be controlled from the computer. ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... - Page 10 TZW803+ 8x1 VGA/XGA & AUDIO SWITCHER TALLY 1 INPUT 1 TALLY 2 INPUT 2 Pin # 22 TIME TALLY 3 INPUT 3 Sub - D TALLY 4 INPUT 4 1 (free) 4 sec. TALLY 5 INPUT 5 0 (GND) 10 sec TALLY 6 INPUT 6 TALLY 7...
- Page 11 ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
-
Page 12: Cascade Option And Settings
TZW803+ 8x1 VGA/XGA & AUDIO SWITCHER 9.0 CASCADE OPTION AND SETTINGS The TZW803+ switcher features a CASCADE option that permits connection in series of 4 units to establish a 29x1 selector. ATTENTION In the CASCADE connection, band and technical characteristics are no longer guaranteed. In the case of CASCADE connection, the output of the first TZW803+ must be connected to input 1 of the second TZW803+ and so on. -
Page 13: Technical Data
:230Vac 50Hz Power consumption :6VA Size (WXDXH) :483X210X88 Weight :2.5Kg Operating temp. range:0÷45° Safety :according to EN60065 :according to EN55103-1 and EN55103-2 CE Mark ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 14: Notes
For the duration of guarantee Elpro shall repair faulty units free of charge. Faulty units must be sent with a standard waybill and CARRIAGE PAID to Elpro’s Turin works. Repaired units shall be returned CARRIAGE FORWARD to the consignee.