Shock; Vibration - Seagate ST3160021A Product Manual

Barracuda 7200.7 Product Manual, Rev. D
2.10.5

Shock

All shock specifications assume that the drive is mounted securely with the
input shock applied at the drive mounting screws. Shock may be applied in the
X, Y or Z axis.
2.10.5.1 Operating shock
These drives comply with the performance levels specified in this document
when subjected to a maximum operating shock of 63 Gs based on half-sine
shock pulses of 2 msec. Shocks should not be repeated more than two times
per second.
2.10.5.2 Nonoperating shock
The nonoperating shock level that the drive can experience without incurring
physical damage or degradation in performance when subsequently put into
operation is 350 Gs based on a nonrepetitive half-sine shock pulse of 2 msec
duration.
2.10.6

Vibration

All vibration specifications assume that the drive is mounted securely with the
input vibration applied at the drive mounting screws. Vibration may be applied
in the X, Y or Z axis.
2.10.6.1 Operating vibration
The following table lists the maximum vibration levels that the drive may
experience while meeting the performance standards specified in this docu-
ment.
5–22 Hz
22–350 Hz
2.10.6.2 Nonoperating vibration
The following table lists the maximum nonoperating vibration that the drive
may experience without incurring physical damage or degradation in perfor-
mance when subsequently put into operation.
5–22 Hz
22–350 Hz
0.25-inch displacement (zero to peak)
0.5 Gs acceleration (zero to peak)
1.0-inch displacement (zero to peak)
5.0 Gs acceleration (zero to peak)
15