Bang & Olufsen BEOLAB PENTA Owner's Manual page 8

Connection to other receivers
When connecting your Beolab
Penta, you may use either the
SPEAKER LINK socket or the LINE
IN socket.
SPEAKER LINK socket
(using a shielded cable with 2-pin
DIN speaker plugs)
LINE IN socket
(using a shielded cable with
phono plugs)
9
Plug one end of the cable into
the SPEAKER LINK socket on the
Beolab Penta.
Plug the other end of the cable
into the appropriate
loudspeaker socket on the
receiver.
Repeat the procedure for the
other speaker.
Plug the appropriate cable end
into the LINE IN socket on the
Beolab Penta.
Plug the other end of the cable
into the appropriate phono
socket (pre-amplifier output) on
your receiver.
Repeat the procedure for the
other speaker.
SPEAKER LINK
LINE IN