Bang & Olufsen BEOLAB PENTA Owner's Manual page 2

2
For the UK market only:
IMPORTANT!
The wires in the mains lead supplied with
this apparatus are coloured in accordance
with the following code:
BLUE: NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains
lead of this apparatus may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
- The wire which is coloured blue must be
connected to the terminal which is
marked with the letter N or coloured
BLACK.
- The wire which is coloured brown must
be connected to the terminal which is
marked with the letter L or coloured
RED.
Ensure that your equipment is connected
correctly. If you are in any doubt, consult a
qualified electrician.
For the US market only:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk
of electric shock, do not
remove cover (or back).
No user-serviceable parts
inside. Refer servicing to
qualified service personnel.
WARNING: To prevent fire or
electric shock, do not expose
this appliance to rain or
moisture.
This symbol indicates that a
dangerous voltage constitut-
ing a risk of electric shock is
present within this unit.
This symbol indicates that
there are important operat-
ing and maintenance instruc-
tions in the literature accom-
panying this unit.
This equipment generates and uses radio
frequency energy and if not installed and
used properly, that is, in strict accordance
with the manufacturer's instructions, may
cause interference to radio and television
reception. It has been type tested and
found to comply with the limits for a Class
B computing device in accordance with
the specifications in Subpart J of Part 15
of FCC Rules, which are designed to pro-
vide reasonable protection against such
interference in a residential installation.
However, there is no guarantee that inter-
ference will not occur in a particular
installation. If this equipment does cause
interference to radio or television recep-
tion, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interfe-
rence by one or more of the following
measures:
- Reorient the receiving antenna
- Relocate the computer with respect to the
receiver
- Move the computer away from the recei-
ver
- Plug the computer into a different outlet
so that computer and receiver are on
different branch circuits.
If necessary, the user should consult the
dealer or an experienced radio/television
technician for additional suggestions. The
user may find the following booklet prepa-
red by the Federal Communications Com-
mission helpful:
"How to Identify and Resolve Radio-TV
Interference Problems".
This booklet is available from the U.S.
Government Printing Office, Washington,
DC 20402, Stock No. 004-00345-4.