Installing The Optional Fan - Asus Striker Extreme Owner's Manual

2.3.4

Installing the optional fan

Install the optional fan only if you are using a passive cooler or a water cooler.
Installing the optional fan with an active CPU cooler will interfere with the airflow
and destabilize the system.
1. Position the fan above the pipe
and heatsink assembly.
3. Carefully push down the fan until
it snugly fits the heatsink, then
connect the fan cables.
•
•
2-14
Plug the optional fan cables to any of the OPT FAN1~5 connectors on the
motherboard.
Make sure the optional fan is installed correctly to prevent damage to the
fan and motherboard components.
2. Fit the grooved edge to the
heatsink.
4. The above photo shows the fan
installed on the motherboard.
Chapter 2: Hardware information