Rebuilding A Raid Array - Asus Striker Extreme Owner's Manual

[Ctrl-X]Exit
A new set of navigation keys is displayed on the bottom of the screen.
6. Press <Ctrl+X> to save settings and exit.

Rebuilding a RAID array

To rebuild a RAID array:
1. From the Array List menu, use the up or down arrow keys to select a RAID
array then press <Enter>. The RAID Array details appear.
RAID Mode: Mirroring
Striping Width: 1
Adapt
2
1
5-30
NVIDIA RAID Utility
- Array List -
Boot Id Status
No 4 Healthy
[↑↓]Select [B]Set Boot
Array 1 : NVIDIA MIRROR
- Array Detail -
Channel M/S Index
1 Master 0
0 Master 1
[R] Rebuild [D] Delete
Oct 5 2004
Vendor Array Model Name
NVIDIA MIRROR XXX.XXG
[N]New Array
XXX.XXG
Striping Block: 64K
Disk Model Name
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
[C] Clear Disk [ENTER] Return
Chapter 5: Software support
[ENTER]Detail
Capacity
XXX.XXGB
XXX.XXGB