Creating A Concatenation Set - Asus Striker Extreme Owner's Manual

Creating a CONCATENATION set

To create a CONCATENATION set:
1. From the Silicon Image
configuration utility main
menu, select Create RAID
set then press <Enter>.
2. From the sub-menu Select
CONCATENATION then
press <Enter>.
3. The selection bar moves to the
Physical Drive menu. Using the up
or down arrow keys, select a drive
then press <Enter> to set a drive
for the RAID set.
4. The utility prompts a message to
input the RAID size, use the up or
down arrow keys to set the RAID
size then press <Enter>.
5. Press <Y> to confirm or <N> to return to the Main Menu.
•
•
5-40
Configure a CONCATENATION set when using a single Serial ATA drive;
otherwise, the system will not recognize the drive.
You can also create a RAID set using the SATARAID5 GUI utility under a
Windows environment.
®
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
PHYSICAL DRIVE
0 XXXXXXXXXXX
1 XXXXXXXXXXX
2 XXXXXXXXXXX
3 XXXXXXXXXXX
RAID0 RAID0
RAID1
RAID1
RAID10
SPARE DRIVE
SPARE DRIVE
CONCATENATION
XXXXXXMB
XXXXXXMB
XXXXXXMB
XXXXXXMB
Chapter 5: Software support