Daily Use; Make And Answer Calls - Bang & Olufsen BeoCom 2 Manual

4
0--9
23456689
C
23456
0--9
23456789
23456789
0:12

Make and answer calls

The key on the BeoCom 2 is used to start
and end a call. During the call, the phone
displays the duration of the call and the
number or name of the person called. If you
do not wish to answer a call, you can mute
the ringing signal.
To make a call ...
> Enter the telephone number using the digit
keys.
> To correct a digit, push the Track point left or
right to move the cursor to the right of the digit
in question and press C to delete it.
> Press to make the call. The call time is shown,
and if the name is stored in the Phonebook, this
is shown as well.
> Press to end the call. Alternatively, place the
handset in the charger.
To answer a call ...
> Press to answer the call.
> Press to end a call. Alternatively, place the
handset in the charger.
To mute a handset's ringing ...
> Press C to mute the ringing signal for the
incoming call.
If you end a call to or from a number not
previously stored in the Phonebook, the display
prompts you to do so. Refer to Store a number
after a call on page 7 for more information.
To get a dial tone before entering the number,
press .