Bang & Olufsen BeoCom 2 Manual page 27

– Open base for registration allows you to open
the base for registration of additional handsets.
This option is only available if you use the
handset with a BeoLine base.
– Change pincode allows you to enter a new
pincode for your base and change the pincode.
Use the number keys to enter the pincode and
the OK key to store it. The default pincode is
0000.
Language ...Select the language of the display
texts.
Switchboard ...Set BeoCom 2 for use with a
switchboard. Options are Yes and No. If you
choose Yes, use the number keys to enter a prefix
code and push the Track point to select a pause
length. You can select a pause length between 0
and 12 seconds, or select Wait. Note that you
must enter prefix codes manually when entering
phone numbers in the Phone book. This option is
only available if you use the handset with a
BeoCom 6000 base, a BeoLine PSTN base, or a
BeoLine ISDN base.
Flash time ...Choose long, short or customized
The correct flash time depends on how you have
connected your phone.
27