Intel; Installing Hard Disks - Asus P5AD2-E Deluxe Owner's Manual

5.4.1 5.4.1 5.4.1

Installing hard disks

Installing hard disks Installing hard disks
5.4.1 5.4.1 Installing hard disks Installing hard disks
The motherboard supports Ultra DMA /133/100/66 and Serial ATA hard
disk drives. For optimal performance, install identical drives of the same
model and capacity when creating a disk array.
Installing Parallel ATA hard disks Installing Parallel ATA hard disks
Installing Parallel ATA hard disks Installing Parallel ATA hard disks Installing Parallel ATA hard disks
To install IDE hard disks for a RAID configuration:
1. Set the jumpers of each hard disk as Master/Master or Slave/Slave.
2. Install the hard disks into the drive bays.
3. Connect the HDD signal cables.
4. Connect a 4-pin power cable to the power connector on each drive.
Installing Serial ATA (SATA) hard disks Installing Serial ATA (SATA) hard disks Installing Serial ATA (SATA) hard disks
Installing Serial ATA (SATA) hard disks Installing Serial ATA (SATA) hard disks
To install the SATA hard disks for a RAID configuration:
1. Install the SATA hard disks into the drive bays.
2. Connect the SATA signal cables.
3. Connect a SATA power cable to the power connector on each drive.
Refer to the RAID controllers user manual on the support CD for detailed
information on RAID configurations.
5.4.2 5.4.2

Intel

Intel ® ® ® ® ®
5.4.2 5.4.2 5.4.2 Intel Intel Intel
This motherboard supports RAID 0, RAID 1, and Intel
configurations for Serial ATA hard disks drives through the Intel
Southbridge chip.
Setting the RAID item in BIOS Setting the RAID item in BIOS Setting the RAID item in BIOS
Setting the RAID item in BIOS Setting the RAID item in BIOS
You must set the RAID item in the BIOS Setup before you can create a RAID
set(s). To do this:
1. Enter the BIOS Setup during POST.
2. Go to the Main Menu Main Menu, select IDE Configuration Main Menu Main Menu
Main Menu
3. Select the item C o n f i g u r e S A T A A s
the configuration options.
4. Select R A I D R A I D from the C o n f i g u r e S A T A A s R A I D R A I D R A I D
press <Enter>.
5. Select the item O n b o a r d S e r i a l - A T A B O O T R O M
E n a b l e d E n a b l e d
then select E n a b l e d E n a b l e d E n a b l e d from the options.
6. Save your changes, then exit the BIOS Setup.
Refer to the system or the motherboard user guide for details on
entering and navigating through the BIOS Setup.
A S U S P 5 A D 2 - E D e l u x e A S U S P 5 A D 2 - E D e l u x e
A S U S P 5 A D 2 - E D e l u x e A S U S P 5 A D 2 - E D e l u x e A S U S P 5 A D 2 - E D e l u x e
RAID configurations RAID configurations
RAID configurations RAID configurations RAID configurations
IDE Configuration IDE Configuration IDE Configuration, then press <Enter>.
IDE Configuration
C o n f i g u r e S A T A A s C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s, then press <Enter> to display C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s item options, then C o n f i g u r e S A T A A s C o n f i g u r e S A T A A s C o n f i g u r e S A T A A s
O n b o a r d S e r i a l - A T A B O O T R O M O n b o a r d S e r i a l - A T A B O O T R O M, press <Enter>, O n b o a r d S e r i a l - A T A B O O T R O M O n b o a r d S e r i a l - A T A B O O T R O M
® Matrix Storage
® ICH6R
5 - 1 7 5 - 1 7
5 - 1 7 5 - 1 7 5 - 1 7