Page 10
Do not expose to direct sunlight. The station contains highly flammable liquid. Keep it away from sources of ignition. No smoking. Keep out of reach of children. Do not refill cartridge. Use only original Braun refill cartridge.
Page 11
Description 1. Power supply cord set 2. «start cleaning» button 3. Station-to-shaver connecting contacts 4. Station lift button for cartridge exchange 5. Display for cleaning programs 6. Display for cleaning fluid status 7. Station mains socket 8. Cleaning cartridge 9. Shaver foil protection cap 10.
Page 12
The display for cleaning fluid (6) will show how much cleaning fluid is in the cartridge: a) Cleaning solution sufficiently available full full full b) Up to 7 cleanings left c) New cartridge required empty empty empty Make sure the foil protection cap (9) is removed from the shaver.
Page 13
Shaving If the shaver is locked into the Clean&Charge station, push the «start cleaning» button (2) to release the shaver and take it out. Switch positions 0 = off (switch is locked) Press and push up the switch to operate the shaver: 1 = Shaving with the pivoting head (the pivoting cutting system automatically adjusts to every contour of your face).
Page 14
Quick cleaning Press the foil release buttons (12) to lift the shaver foil (do not remove the foil completely). Switch on the shaver for approx. 5–10 seconds so that the shaved stubbles can fall out. Thorough manual cleaning Manual cleaning is recommended only when the Clean&Charge station is not available, e.g.
Page 15
6. Replace shaving foil and cutter block. To help obtain a new shaver foil and cutter block at your dealer or Braun Service Centre, the display shows the part No. 8000. To reset the display, push the info key (17).
Page 16
This guarantee extends to every country where this appli- ance is supplied by Braun or its appointed distributor. This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appli- ance.