Sony DCR-HC1000 Service Manual page 22

[SERVICE POSITION TO CHECK THE VTR SECTION]
Connection to Check the VTR Section
To check the VTR section, set the VTR to the "Forced VTR power ON" mode.
Operate the VTR functions using the adjustment remote commander
(with the HOLD switch set in the OFF position).
Setting the Forced VTR Power ON mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: A, address: 10, set data: 02, and press
the PAUSE button of the adjustment remote commander.
Adjustment remote
commander (RM-95)
Monitor TV
A/V
CN5404
LANC
JK-271 board
CN2015
FP-942 flexible
CN2106
board
Extension cable (120P)
(J-6082-546-A)
DCR-HC1000/HC1000E
2. DISASSEMBLY
2. DISASSEMBLY
16
To eject a cassette, connect pin qs of
CN1403 on RP-241 board to pin qh
(GND) using a 1k Ω register
(1-249-417-11) for 1 second.
AC power
adaptor
DC-IN
CN1204
DC-IN
DB-017 board
CN1001
CN1007
Exiting the Forced VTR Power ON mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: A, address: 10, set data: 00, and press the
PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
CN1403
12 1
AC IN
FP-939 flexible board (80P)
CN1004
VC-366 board
I/F unit for LANC control
(J-6082-521-A)
2-9
Mechanism deck
CN1403
RP-241 board
CN1404
CPC-15
(J-6082-564-A)
8
1