Table of Contents
Advertisement
COMPACT DISC (CD) OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1
Insert a CD as described on
page 8. With the power on, press
the
PLAY/PAUSE (®p)/CD
button to select CD; playback will
start automatically.
4
1
2
Select the first track to be played
back using the Tune/Skip/Search
o 1 or n 2 button.
7
Press the PLAY/PAUSE (®p)/CD
button to begin playback; "PROG"
will light and the tracks will play in
the order programmed.
2
Press the Stop (I) button to stop
playback.
5
Press the PROG./CH SAVE
button again.
NOTES:
•
Programming is the ability to preselect the order in which a series
of tracks will be played.
•
Each track may be stored in the program memory as many times
as desired (up to 20 tracks).
•
As each track is played, its track number will be displayed. You
can move forward or backward through the programmed tracks
with the Tune/Skip/Search n or o button.
•
The CD player will stop after all programmed tracks have been
played or the Stop (I) button is pressed.
•
To cancel programmed playback, press the Stop (I) button while
in the stop mode, or open the CD \door.
•
After you have selected 20 tracks (the last programmed memory)
and press the PROG./CH SAVE button to confirm, the display will
continue to show "P20".
11
3
Press the PROG./CH SAVE
button once; "P 01" (program
number), "00" track number and
the Program indicator will appear
in the display.
6
1
2
Repeat steps 3 to 5 to program
the other desired tracks in
sequence (up to 20 tracks).
Advertisement
Table of Contents
