Page 2
Thanks for buying our Lukas black box. 2. Product composition content This manual was prepared for a Lukas HD class black box model of QRONTECH 3. Name of each component Co., Ltd., so there may be errors or omissions in technology or editing.
3. Tinting or external devices(hi-pass, terminal, etc.) installed in the vehicle can affect 11. The image of this product can be recorded dimly or falsely in a vehicle whose the reception of GPS signals. front is over-tinted, so pay attention..LUKAS BLACKBOX User’s Guide ...
After starting the vehicle, check whether the etc. (AV cable option purchased) general passenger car: -0.2(for 3700) version of a segment window is displayed..LUKAS BLACKBOX User’s Guide ...
Changing between an automatic travel mode a parking mode - Changing between a travel mode a parking mode without separate operation Built-in high-performance microphone - Simultaneous recording of both recording images and audio data ... LUKAS BLACKBOX User’s Guide ...
Page 7
(Download the firmware by confirming the model you use.) setting by GPS (used overseas) J-21 / JE21 : LK-3700G, LK-2700G Separate setting of C-21 / CE21 : LK-3700, LK-2700 G sensor sensitivity Separate operation of sensitivity setting in travel and parking...
Page 8
7. Segment and buzzer sound Lukas black box segment LED message SEGMENT LED message BUZZER Detailed description SEGMENT LED message BUZZER Detailed description A screen appearing during initial booting of a black 2 times drv appears when converting into a travel mode.
Separate the SD memory card after the product has completely ended by all means. 3. Completely pulling out the power cable connected to the cigar jack can prevent the vehicle battery from being discharged..LUKAS BLACKBOX User’s Guide ...
Page 10
“See you” and a buzzer sound on the black box segment window, and then remove the memory card. 2. Connect the memory card to the computer or laptop, and then execute the Lukas viewer or a general video player.
Page 11
Installation method GPS map information window 1. Install the Lukas viewer.msi. (It is stored in the memory card when you buy a black box, A map showing the position of running vehicles is displayed at the right bottom of a Lukas or you can download it from the Lukas homepage as well.)
Page 12
1. End travel, turn OFF the black box power, and then remove the memory card. Use of an event buzzer: Check this when you want to use an 2. Connect the SD memory card to the PC you are using, and then execute the Lukas viewer impact alarm buzzer program.
When separating or inserting a SD card, be sure to turn OFF the power and segment. Separating or inserting a SD card with power turned ON can break the SD card or make the product work abnormally..LUKAS BLACKBOX User’s Guide ...
Page 14
However, if you have a black box environment setting value, e.g. A Lukas black box has a built-in impact sensor that works depending on the travel curve, you have set the screen adjustment value and the impact sensor sensitivity value as a user...
Page 15
Q. The product generates heat, but is it normal? Service technology support The Lukas black box series was developed to normally operate at preservation temperature Warranty content -30~80 and operation temperature -20~70 . You should observe the matters related to...
Need help?
Do you have a question about the LK-3700G and is the answer not in the manual?
Questions and answers