Windows Nt 4.0; Install Nt4.0 Display Driver - Asus AGP-V3100 User Manual

Install NT4.0 Display Driver

WARNING! Before installing the ASUS AGP-V3100 series display driver in Win-
dows NT 4.0, make sure that you have installed Windows NT 4.0 Service Pack3
(You must use the same update language of your Windows language available on the
Internet at http://www.microsoft.com/isapi/support/bldqpage.idc? ProductPage=q_servpk).
Otherwise, the system will hang and will not be able to start up!
NOTE: The following procedures assume that your CD-ROM drive letter is D.
To have all the AGP features, you must be using Windows NT 5.0.
1. Insert the installation CD disc or double click
the CD drive icon in My Computer to bring up
the autorun screen or run Setup.exe in the root
directory of the CD disc.
2. Click the Settings tab.
3. In the refreshed Display Properties dialog box,
click Chnage Display Type.
4. In Adapter Type under Display Type, click Change.
5. In Change Display, click Have Disk... and then select the path to the NT 4.0
driver, that is,
6. In the newly created Select Device item, AGP-V3100 Vx.xx.xx Enhanced
Driver appears. Click OK to start copying files.
7. After completing the installation, NT 4.0 will go back to the Change Display
Type box.
8. Click Close or Apply.
9. In System Settings Change, select Yes to restart your computer.
10. After restarting, NT 4.0 will run on 640x480x256 color, 60Hz vertical refresh
rate, NI (non-interlaced)
20 ASUS AGP-V3100 Series User's Manual
IV. Windows NT 4.0
.
D:\NT40\