Tips - GE J2B912 Owner's Manual & Installation Instructions

Before you call for service...
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem Possible Causes
Plug on range is not completely
Top burners do not light
inserted in the electrical outlet.
or do not burn evenly.
(The front right burner is
Burner slits on the side of the
designed to have slightly
burner may be clogged.
smaller flames between
the 6 and 9 o'clock
positions. This is normal.)
Improper burner assembly.
Burner flames very Improper air to gas ratio.
large or yellow
Surface burners light
The oven gas shut-off valve
but oven does not
may have accidentally been
moved during cleaning or
moving.
48
What To Do
• Make sure electrical plug is plugged into a live, properly
grounded outlet.
• Remove the burners and clean them. Check the
electrode area for burned-on food or grease. See
the Care and cleaning of the range section.
• Make sure the burner parts are installed correctly.
See the Care and cleaning of the range section.
• If range is connected to LP gas, contact the person
who installed your range or made the conversion.
• To check the oven gas shut-off valve, remove the
warming drawer (see the Care and cleaning of the range
section). Look for the gas shut-off lever at the back of
the range.
Lever is
shown closed.
PULL TO OPEN.