Remote Control - Black & Decker FS1610R User Manual

Oscillation
The fan can oscillate when in use to circulate air
around a greater area.
•
Press the oscillation button to start
oscillation.
•
Press the oscillation button to stop
oscillation.
Timer
The timer can be used to set the running time of
the fan.
Runtime
1 Hour
2 Hours
4 Hours
8 Hours
•
To switch on, press the ON/SPEED button
the required number of times to set the
desired speed. The fan will start.
AUTO/L M H
•
Press the timer button the required number
of times to set the run time. The fan will
automatically stop when the run time is
reached.
Press button
1 time
2 times
3 times
4 times
Adjusting the angle of the fan
The angle of the fan can be adjusted up and
down.
•
Tilt the head of the fan to the desired angle.
Adjusting the height of the fan
•
Loosen the screw at the top of the support
tube by turning it anti-clockwise.
•
Lift the fan to the desired height.
•
Tighten the screw at the top of the support
tube by turning it clockwise.

Remote control

Please insert 2 'AAA' size batteries into the
remote as per the marking in the remote cavity.
•
To fit the batteries, remove the cover from the
rear of the remote control.
•
Insert 2 'AAA' sized batteries following the
markings in the cavity. (+ for positive and –
for negative)
•
Re-fit the battery cover.
ENGLISH
7