The Record View Page - GEM SK760 Owner's Manual

The Record View page

The Record View page shows several parameters
which you can set for your User Style before start-
ing your recording or playback.
MODE... (F1)
Opens the «Record Mode» dialog window where
you can select various recording options.
REPLACE - The new notes substitute "old" notes
already present in the tracks being recorded.
OVERDUBB - New notes are merged with those
already present on the tracks being recorded.
PUNCH IN/OUT - A means of inserting a correc-
tion without repeating a recording. Punch record-
ing is activated by pressing an appropriately pro-
grammed pedal (under EDIT CONTROLS).
Activate the recording with PLAY. When the song
reaches the point at which the correction must
be inserted, press the pedal. At this point, the
recording proceeds in "replace" mode. When the
correction is complete, release the pedal to stop
the recording.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5•8 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
REC RIFF... (F2)
Opens the SELECT RIFF dialog window where
you can select a riff to record.
Select the Variation, section and chord with the
cursor buttons and press ENTER to confirm.
SOUND VIEW (F5)
Recalls the Sound View page where you can see
and change the sounds assigned to the Perform-
ance.
REC VIEW (F6)
Recalls the «Record View» page where it is pos-
sible to control the record/play parameters.
ERASE... (F7)
Cancels a track, riff, variation or the entire Style.
TRACK - Cancels the selected track.
RIFF - Cancels the selected riff.
VARIATION - Cancels the selected variation.
STYLE - Cancels the entire Style.
○ ○