Restoring The User Styles Memory - GEM SK760 Owner's Manual

9. Confirm the recorded track with the corre-
sponding soft button.
The Record icon will change to the Seq-play
icon.
10. Select another track to record and repeat
the procedure for other tracks until you have
recorded all the riffs you want for your Style.
Remember to confirm each track you record
before selecting another one, otherwise you
will record your new track and add the same
events to the track already recorded.
11. When you have finished, press the RECORD
button to escape Record mode.
The LED on the RECORD button goes off
and the display shows the new Style window.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

RESTORING THE USER STYLES MEMORY

If you have loaded disk-based User Styles, or
have recorded User Styles using up all the
memory dedicated to the storage of Styles, a
4. Specify a sample number (by rotating the
quick and easy way of clearing User Style
Dial) and press ENTER.
memory and making room for other Styles is to
Shortly after, the sample transfer process
use the Restore Styles operation. For details
begins. During the transfer, the process is
regarding the RESTORE functions available, re-
monitored on the bar graph of the main Sam-
fer to the GENERAL chapter, page 8.8, in the
ple Translator display.
Reference Guide.
If the sending device is another SK760/
Naturally, you must remember to save the User
880SE, you can specify the numbers from 0
Styles that you don't want to lose to disk before
to 15 which correspond to the 16 locations of
proceeding with the restore procedure.
the Sample Translator.
If you're requesting a sample from an exter-
nal computer or sampler, you can specify a
number from 0 to 255, depending on the sam-
ple numbers stored in the external unit.
While the transfer is taking place, the Sam-
ple Req option changes to "Dump Stop". Use
Dump Stop to stop the sample transfer from
the external device.
TO SAVE A SAMPLE USING THE SAMPLE DUMP
STANDARD (SEND SAMPLE)
• Press SEND SAMPLE (F7).
Shortly after, the sample transfer process
begins. During the transfer, the process is
monitored on the bar graph of the main Sam-
ple Translator display.
While the transfer is taking place, the Send
Sample option changes to "Dump Stop". Use
Dump Stop to stop the sample transfer to the
external device.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User Styles 5•7
○ ○ ○ ○ ○ ○ ○ ○ ○