Table of Contents
Advertisement
TO PLAY A CD (Standard, CD-R and CD-RW)
1
1
Open the CD compartment lid by sliding
the CD OPEN switch 1 to the right.
Gently press a disc, label side up, onto
the spindle until it locks in place. Close
the CD compartment lid. Insert
headphones into the PHONES jack. Slide
the FUNCTION switch 2 to the CD
position.
3
4
1
Adjust the VOLUME control 1 and
DBBS switch 2 as desired. To skip
forward or backward through the tracks
on
the
disc,
Skip/Search/Tuning
button . To search forward or backward
through the tracks on the disc, press
and hold the Skip/Search/Tuning
3 or
4 button .
CD OPERATION
2
press
the
3 or
4
9
2
Press the PLAY/PAUSE (
ON button to start playback. To pause
playback, press the PLAY/PAUSE
®p
(
)/POWER ON button again, the
elapsed time will blink. Press once
again to resume playback.
4
1
When the disc is through playing, it will
stop. Press the STOP (I)/POWER
OFF button to stop the disc before it is
finished; the total number of tracks will
appear. Press the STOP (I)/POWER
OFF button again while in the stop
1
mode to turn the unit off or wait
approximately 60 seconds and the unit
will automatically turn off.
®p
)/POWER
1
1
Advertisement
Table of Contents
