Mitsubishi Q80BD-J71GP21S-SX User Manual page 28

(c) Connecting to the connector
(3) Connecting external power supply cable to the board
Properly insert the wired external power supply cable to the
external power supply cable connector of the Q80BD-J71GP21S-
SX until a click is heard.
Keep the cable away from the main circuit cable, power cables and/
or the load cables for any other than programmable controllers.
Ensure a distance of 100 mm (3.94 in.) between them.
POINT
Be sure to twist the external power supply cable.
According to the following
pin-out, fully insert the
crimped cable to the
connector until a click is
heard.
Pin No. Description
1
2
3
Connector
Contacting pin
24V
24G
Open
20
24V
24G