64 |
ENGLISH
5.3.3 Advanced
In some special situation, your network environment only provides PPPoE connection
(ADSL service), there is no NAT/router available. You will then need to set the PPPoE
settings in the "Advanced Network" page. Only the PPPoE username and password
are needed to let PPPoE work. After the "Save & Apply" button is clicked, the PPPoE
function will work immediately. You can check the "Registration status" in the
"Information" page to see if the EM6250 is registered using the PPPoE connection.
Need help?
Do you have a question about the EM6250 Easy Pro View and is the answer not in the manual?