Bottom Side; Remote Control - Mitsubishi Electric WD3300U User Manual

Preparating your projector (continued)

Bottom side

Remote control

29
About the laser beam
This remote control is a Class 2 laser product. (Max. output: 1 mW, Wavelength: 620-640 nm)
Beam Divergence: 6 m distance about 10.0 mm x 10.0 mm (±6.0 mm)
Caution:
• Pressing the LASER button on the remote control emits a laser beam. Do not look into the laser beam directly. Do
not point the laser beam at anyone. Looking at the laser beam directly may damage eyesight.
• Use of controls or adjustments or procedures other than those specified herein may result in hazardous radiation exposure.
• This remote controller cannot be repaired.
1
1
2 3
4
5
17
18
6 KEYSTONE AUTO POSITION
19
COMPUTER HDMI VIDEO
7 1 20
DVI-D(HDCP) S-VIDEO
2
21
8 ZOOM/FOCUS LENS SHIFT LASER
9 22
10 23
24
11
25
12 ENTER
MENU R-CLICK
13 HOME PAGE UP VOLUME
26
END PAGE DOWN
14
ASPECT
15
27
16 CE AV MUTE FREEZE
28
http://www.pureglare.com.au
1 Adjustment feet
1 Laser aperture
2 Transmission window
3 Wired remote control jack
4 Indicator
5 HDMI button
6 POWER button
7 COMPUTER 1, 2 buttons
8 ZOOM/FOCUS button
9 LENS SHIFT button
10 Mouse pointer
11 PAGE UP and PAGE DOWN buttons
12 MENU button
13 HOME button
14 END button
15 ASPECT button
16 CE (Color Enhancer) button
17 KEYSTONE button
18 AUTO POSITION button
19 VIDEO button
20 DVI-D(HDCP) button
21 S-VIDEO button
22 LASER button
23 , , ,  buttons
24 R-CLICK button
25 ENTER button
26 + , - (VOLUME) buttons
27 FREEZE button
28 AV MUTE button
29 Left click button
• Pressing the LASER button emits a laser beam.
Even when you keep holding down the LASER
button, it is emitted only one minute. To keep
emitting it longer, press the LASER button again.
• You can disable the LASER button to prevent
laser radiation due to misuse of the button.
How to disable the LASER button
While holding the LASER button down, press the
 button 3 times.
How to enable the LASER button
While holding the LASER button down, press the
 button 3 times.
• Whenever the batteries are replaced, the
LASER button is enabled.
EN-8