Table of Contents
Advertisement
Menu operation (continued)
Menus displayed in the DETAIL MENU mode
IMAGE menu
IMAGE
COLOR
ENHANCER
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR
TINT
SHARPNESS
ADVANCED MENU
ITEM
COLOR ENHANCER
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR
TINT
SHARPNESS
ADVANCED MENU
NOISE REDUCTION
CTI
INPUT LEVEL
• When COLOR ENHANCER is sRGB, COLOR TEMP., COLOR and TINT can't be adjusted.
• When the setting of COLOR ENHANCER is changed, the displayed image may be disturbed.
• When the COMPUTER1, COMPUTER2, DVI or HDMI is selected as the input source, COLOR and TINT can't be adjusted.
• TINT is available only when the NTSC signal is input.
• INPUT LEVEL is unavailable when the digital signal is supplied from the YC
opt.
AUTO
0
0
STANDARD
0
0
0
OK
SETTING
FUNCTION
AUTO
Select to optimize the settings automatically depending on the input signal.
(Select this option for normal use.)
PRESENTATION
Select to make the displayed image look bright and crisp.
STANDARD
Select to make the displayed image look natural.
THEATER
This option, suitable for viewing movies, makes the displayed image look soft
and smooth.
sRGB
Select to give priority to the color reproducibility.
USER
Select to set the gamma curve, set BrilliantColor™ or adjust the color
intensity or color balance as desired. (See page 34.)
±30
Use to adjust the contrast of the projected image. (See page 33.)
±30
Use to adjust the brightness of the projected image. (See page 33.)
STANDARD / LOW /
Select from the predetermined color temperatures.
HIGH
USER
Use to adjust the color temperature to a desired value. (See page 34.)
±10
Use to adjust the color thickness of the projected image. (See page 33.)
±10
Use to adjust the color tint of the projected image. (See page 33.)
±5
Use to adjust the sharpness of the projected image. (See page 33.)
OK
The ADVANCED MENU is displayed for the following settings.
ON / OFF
Use to reduce noise and roughness in the image when noisy video signal is
input.
ON / OFF
Use to correct smeared color boundaries.
±5
For analog signal input:
The input level of video signal differs among devices to be connected. High
input level causes solid white in displayed image and low input level causes
displayed image to get dark. Use this menu to adjust the input level of analog
video signal.
ENHANCED /
For digital signal input:
NORMAL
When a digital signal is input, ENHANCED and NORMAL are switchable. (See
page 22.)
http://www.pureglare.com.au
opt.
IMAGE
ADVANCED MENU
NOISE REDUCTION
CTI
INPUT LEVEL
C
/YP
P
B
R
B
R
EN-29
ON
ON
0
terminal of the connected device.
Hide quick links:
Advertisement
Table of Contents
